Power Window

electric windows

SolusiMobil.Com - Glass door of your car, although its movement between the up or down, but treatment should not be ignored. Power your car window to get attention and regular maintenance to keep it to function properly. Problems that often arise are usually choked up and down the glass and the glass tilted to the present position is not closed tightly. To avoid things like that is to clean the glass with a silicone rubber spray is sold in the market, but it is recommended not to use penetrant. Because the liquid silicone spray is more neutral than the penetrant that can actually invite dust again. Note the condition of rubber dust barrier along the bottom of the glass, including the rubber attached to the door frame. Spray along the gum line up evenly. Point other than to shed debris buildup, also restores the elasticity of rubber is usually so brittle.
A little extra effort to open the door trim to treat the inside of the power window. Be careful with plastic clips that are not broken. Open the plastic cover by removing the glue along the edge of the plastic. Check the condition of the rail containing the steel wire to go up and down the glass. Apply just enough fat look fat when it is dry and dirty. Do not overdo the excess fat so that it does not contaminate the glass when in use.
Then continue by looking plastic glass holders. Tighten if feels loose and position the glass so that serata possible. Be careful when tightening, because of age wear, plastic holder jutru glass may break. Loading-unloading is finished, try to move the power window by placing the key in advance. If it is certain that no longer obstacles, continue to close the back plastic cover. Do not forget to spray the socket-socket power window button to use contact cleaner to clean. Electrical socket which can also make a dirty glass movement is not perfect. otherwise it could potentially cause a short circuit electrical current