40th TOYOTA INDONESIA ANNIVERSARY

SPECIAL AFTER SALES PROGRAM- INDONESIA TOYOTA 40th ANNIVERSARY 

In order toyota anniversary in Indonesia PT TOYOTA ASTRA MOTOR hold a car service program with prizes.
Program objectives are to as "umbrella program" commemorating 40 years of Toyota in INDONESIA with appreciation to pelanaggan faithful who continue to support Toyota's business in Indonesia.

Overview General Programs.40th TOYOTA INDONESIA ANNIVERSARY
The name of the program SPECIAL PROGRAM AFTER SALES INDONESIATOYOTA-40 th ANNIVERSARY.
Where all models are manufactured TOYOTA mengituti this program should startfrom the Avanza, Innova, Camry, Corolla Altis, and the others except the limo.
Rules of the game where all the vehicles that do all kinds of services performed by the customer at the official workshop Toyota general repair and body repair.
System program is a lottery where customers fill out raffle tickets and then inserted into the coupon box program sweepstakes that will be raffled each month begins the program period from January to March 2012
Benefit for the customer is any customer a chance to win 1 unit VELOS ALL NEW Avanza 1.5 M / T, 3 units of ALL NEW Avanza 1.3 M / T, 40 units of SamsungGalaxy Tab 16 GB, 40 units of the Apple iPod Touch 4GB, and 400 units ofBlackBerry Gemini .
So hopefully guide the implementation of the program created the program "SPECIAL AFTER-SALES PROGRAM INDONESIA TOYOTA 40th ANNIVERSARY''Service you can enjoy car wins prizes.

All New Avanza & The All New Avanza Veloz

Avanza

Toyota avanza 2012

Sales since its launch on 11th November every new advance later this month exceeded21,000 units, with a market share of 57%. Director of TAM, Hilman said Saladin All NewAvanza sales target in 2011 exceeded the target of a market share of 55% on the MPV.Payments until the end of 2010 140.000 units, while the end of September 2011 was 126 000 units, Hilman visit to New Avanza Sumatra, Java, Bali to Malang said yesterday.Luqman Hakim, said Sales Supervisor Sutoyo Auto2000 Malang, the development of all new Avanza sales reached 160 units, which expects to sell 230 units by the end of the year Auto2000 Sutoyo, breadfruit and Kartika Sari. Luqman confessed the pivotal point of all new Avanza a little more, he was optimistic that the new Avanza can all be perceivedby the market.
(Source: Bisnis Indonesia)
All New Avanza & The All New Avanza Veloz

ALPHARD TOYOTA

toyota alphard 2012

TOYOTA ALPHARD

In the first year of the Dragon Air, Toyota-Astra Motor introduced the new Toyota Corolla with a glass on the outside and inside, to keep all of their superiority. Sampoerna Strategic Square, Sudirman, South Jakarta, Monday (09/01/2012) is entered President Director Johnny Darmawan TAM directly.

The completion of the exterior visible from the front, which looks more luxurious and powerful. Degrees of pressure is tough and strong. If the original bar grille consists of three, is now added four. Even with chrome on the hood, the decorated reinforce the impression of great strength. Fog bigger and stronger and can not be reduced to the previous version. The next section, changes in the design of the new light alloy wheels 17 inches in diameter. On the back there are improvements in the permit for the installation of the back is wider and reinforce the impression of stability. The new design rear lights also. In addition, other features remain such as the user as an artistic lighting, sunroof, metallic design company, until the chairs are practical.This does not change much in, because it is a luxury minivan is almost perfect. Show Alphard is a spacious bedroom, large sliding doors, a stool in the second row (may be with footrests, adjustable arms. All electrical control) equipped the torch is lit at the door for easy passenger night by the light of the lamp in the ceiling, reinforced the impression of luxury. This is not to stop Toyota continues to improve comfort and driving pleasure.Based on feedback from users for improvements in TAM-audio system. Number of speakers is now the tenth of the last eight. "But more than the increase in the number of speakers, New Alphard uses high-quality speakers with a focal length of Beryllium inverted dome tweeter for crystal clear audio is provided to all clients as well as produce," said Marketing Director of TAM, Joko Trisanyoto. Corolla two-tone dashboard by adding a dark, dark to enhance the impression of luxury enhanced.Alphard, that all functions, such as safetynya seven airbags (two front, left and right front passenger / driver, two on the glass and the other driver's knee), GOA body structure (body is designed so that the impact energy of the carrier), AFS (light come together to help the driver, there will be further look into the corner), the VCS, which helps the driver control the car in the corner at high speed.Continue to offer the best possible experience for you, the customer is Toyota, all of the new Alphard was acquired in January 2012 is assured tahun/50.000km tahun/50.000km third April. This is the last four years, new users need not worry Alphard thinking in health care "kencananya train." New Toyota Alphard comes with three options to meet the needs of 2.4 X, 2.4 and 3.5 V

BLOWER MOTOR FAN

How to replace blower motor  
Without you realizing that you sucking air every day your car is containing dust, why do so because without you realizing the dust dikarpet or footwear that you wear contain / carry dust from the outside.Cleaning the carpet every day it is nice to reduce the amount of dust dikarpet, but the dust that has been sucked and stuck in the blower motor fan if you are already clean.To find out how to clean the blower fan motor follow these instructions:
1.OFF THE CABLE FROM NEGATIVE BATTERY TERMINAL.
# Wait at least 90 seconds after removing the cable to prevent the airbags work.

2.OFF DOOR ASSEMBLY GLOVE COMPARTMENT.
# 2 Remove the hinge (the hinge).

# Release 2 stopper and drop the glove compartment door.

3.UNDER NO COVER OFF. 2 INSTRUMENT PANEL.
# Remove the Claw 3 Claw by hitting them in the direction of the arrow as shown in the figure, and take cover under instrument panel.
Note:Be careful when removing the Claw because it is easy to break, pull slowly.

4.BLOWER MOTOR FAN OFF.
# Remove the connector.
# Remove the 3 nuts and blower motor.






5.CHECK THE BLOWER MOTOR FAN.

# Clean the blower fan motor with a brush that has been given water that has been mixed with water.

# Dry the blower fan motor before replacing it.
Note:Be careful when cleaning not to wet the blower motor components
6.POST MOTOR BLOWER FAN.
# Replace the blower motor with 3 nuts.
# Attach the connector.
7.UNDER COVER POST NO. 2 INSTRUMENT PANEL.
#Link 3 clip and attach the lower instrument panel cover.
8.POST DOOR ASSEMBLY GLOVE COMPARTMENT.
# Enter 2 from the glove compartment door stopper.
# Link  2 hinge (the hinge).
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL.
10.DO SOME INITIALIZATION.
# Perform the initialization using the following procedure:
Instructions:Do the following without stepping on the gas pedal:
* Turn the ignition to the ON position (do not start the engine) and wait for 5 seconds.
* Turn the ignition to the OFF position, and wait for about 15 seconds.
* Turn the ignition to the ON position and turn on the machine.
All New Avanza & The All New Avanza Veloz

FRONT WHEEL ALIGNMENT

Sometimes the wheel alignment monitoring is part of standard automobile maintenance that consists of adjusting the angle of the wheel in terms of organized automobile manufacturers. The purpose of this adjustment is to reduce tire wear and to ensure that the vehicle is moving and real (not "pull" on the side).In your wheel alignment is the key, adjust the angle of the wheels so they are perpendicular to the ground and parallel to each other. The purpose of the adjustment is a maximum life of the vehicle tire and right and true when driving along straight and level.Some ways you can do to make your system more stable steering wheel while driving
1.CHECK TIRE BEFORE FRONT WHEEL ALIGNMENT
Check the tire pressure for installation and suitability.
Cold tire pressure:
Use a dial indicator, check the tire runout.
Tire runout:1.4 mm (0.055-in.) Or more
2.MEASURE VEHICLE HEIGHT  BEFORE FRONT WHEEL ALIGNMENT 

Heavy vehicles:
Tire Size             AB                                CD
 165/80R13           45.1 + / - 15 mm            42.5 + / - 15 mm
                         (1.78 + / - 12:59 in.)       (1.67 + / - 12:59 in.)
185/70R14           45.1 + / - 15 mm                42.3 + / - 15 mm
185/65R15           (1.67 + / - 12:59 in.)         (1.78 + / - 12:59 in.)
Point of measurement:
A: Ground clearance of front wheel center 
B: Ground clearance of the bolt down the middle of the front suspension arm set
C: Ground clearance of rear wheel center 
D: Ground clearance of the bolt side of the middle set of lower control arm front 
CAUTION:* Prior to the wheel alignment, check the height of the vehicle.* Measure the height of vehicles when the vehicle is empty (with a full gas tank, spare tire and equipment keys.
INSTRUCTIONS:The vehicle to swing up and down at the corners to stabilize the suspension before check vehicle height.
3.TOE-IN EXAMINATION  BEFORE FRONT WHEEL ALIGNMENT 

Toe-in:
A+ B                                                 C-D 
0 ° + / - 0 ° 12                                  '0 + / - 2.0 mm
(0 ° + / - 0.2 °)                                (0 + / - 0.08 in.)
INSTRUCTIONS:Just measure the C-D when A + B can not be measured.
If the toe-in is not included in the specification, set in both rack and.
4.SETTING TOE-IN  BEFORE FRONT WHEEL ALIGNMENT 
# Remove the clips steering rack boot.
# Loosen lock nut tie rod end.

# Turn to the right and left rack end with the same amount to adjust the toe-in.
INSTRUCTIONS:Try doing toe-in adjustments to the middle of the specification.
# Verify that the rack end left and right alike.
# Tighten the tie rod end lock nut to specification moment.

Occasion:47 N * m {480 kgf * cm, 35 ft lbf .*}
CAUTION:Adjust the angle tie rod end lock nut after tightening the tie rod end.
5.INSPECTION WHEEL ANGLE  BEFORE FRONT WHEEL ALIGNMENT  
Turn the steering wheel fully to the left and right, and measure the angle of rotation.
Wheel turn angle:Mechanical Steering           Wheels Within                  Wheels of Foreign section
                                                                              (Reference)
 Manual steering                 45 ° 49 '+ / - 2 °               (39.20 ° + / - 2 °)
                                        (45.82 ° + / - 2 °)             (39.20 ° + / - 2 °)


Power steering 
                                         43 ° 42 '+ / - 2 °)              37 ° 40' + / - 2 °
                                        (43.70 ° + / - 2 °)             (37.67 ° + / - 2 °)
When the inner wheel angle right and left are not in accordance with the specifications, check the length of the right and left rack end.
                                      
 6.CHECK camber, caster and SLOPE OF STEERING AXIS  BEFORE FRONT WHEEL ALIGNMENT 

# Put the front wheel in the middle of the alignment tester.
# Remove the wheel cap.# Set camber, caster, steering axis inclination gauge at the center of the axle hub.# Check the camber, caster and steering axis inclination.
Camber, caster and steering axis inclination.:
Camber                       Caster                             Steering Axis Tilt.
 -0 ° 30 '+ / - 45'           4 ° 34 '+ / - 1 °                12 ° 25' + / - 1 °
(-0.5 ° + / - 0.75 °)      (4:57 ° + / - 1 °)               (12:42 ° + / - 1 °)
CAUTION:* Do check when the vehicle is empty (with a full gas tank, spare tire and equipment keys).* Tolerance of differences between right and left wheels is 30 '(0.5 °) or less.
INSTRUCTIONS:There is no camber, caster or steering axis inclination adjustment mechanism.
If the measured value does not match the specification range, check the suspension parts and replace if necessary.
# Remove the camber, caster, steering axis inclination gauge and attachments.
# Replace the wheel cap.
All New Avanza & The All New Avanza Veloz