Alarm button is pressed when there is no sound

Alarm button is pressed when there is no sound


Sometimes there are things that we've panicked first trivial, in fact if we want to be bothered little this may not happen as suddenly your car when it is opened by using the alarm horn sounds the alarm does not sound, but the motor door lock can beopened either up or down.
If you've read the manual use of the alarm you do not need to report if the reportcomes to the garage near his shop when splurging much wah gasoline only.

Here are a few ways if the vehicle you are experiencing anything like the above, in the language of the alarm was called valet MODE or without sound.


How to eliminate the Valet Mode:Open the right front door.
Put the ignition key into the / place.


Turn the ignition key from the OFF position and then back ON then OFF, ON, OFF and then ON .... last stop in this position leave the key in the ON position until the red LED indicator light turns itself off.


Sometimes work is not easy tini, when a red alarm indicator light did not die again like from the start ..... .... unplug the ignition is shut the door .... then open the way again follow as above.
May be useful

Engine lamp on hold when the engine on

Engine lamp on hold when the engine on

Have you ever experienced something on your car when you drive a car where the engine light turns on.
If you've certainly concerned lest the car will strike or sudden death, when this happens you will definitely contact your car dealer or you will come to the dealership when the scene is close to your car.
What if this incident the night confused because you definitely can not go to your car dealership or come due would have been closed.

To be more comfortable you try you follow the steps below:
# Check out or remember what you did before the incident engine light on, for example you finished washing the car, for that check to see if there is cable / socket apart due to leaching.

# Double check that you did the previous installation of accessories, check for loose sockets when installing these accessories.
When you perform the above activities, the more likely it is that causes the engine light kept alive when the machine is turned on.

 
To reset the engine light to die when the machine is turned on, first turn off the machine then remove the EFI fuse 15 amperes, located on the junction block is located in the room no.1 engine for 60 seconds, then replace the fuse that you loose, then turn on the machine and see the lights check engine will die. GOOD TRY.

avanza, online avanza, toyota avanza, toyota avanza, toyota avanza for sale, toyota avanza sale, new toyota avanza, avanza 2011, new avanza, avanza former

Automatic transmission in reverse when the hard pounding

Automatic transmission in reverse when the hard pounding

Have your car suffered damage to the automatic transmission in which thesymptoms can be the engine is way far then the transmission from the neutralposition will be moved to positions of retreat was a big surprise, so there are whogo in shock?

If you have experienced such problems, it was a sign there is a problem with yourcar automatic

These events usually result from a worn clutch plate so that when contact with anotherclutch plate causing excessive buffeting, these events result from the transmission oil change is already too long, although still a little kilometer.

Suggestions for automatic oil change every 80,000 km or preferably 2 years, so as tominimize the incidence of clutch slip / damaged automatic expect you to be durableand energy to stay awake.
avanza, online avanza, toyota avanza, toyota avanza, toyota avanza for sale, toyota avanza sale, new toyota avanza, avanza 2011, new avanza, avanza former

Right front power window glass tilt

Right front power window glass tilt
If the glass front power windows tilt right when raised from the bottom position to top position, this could be due to run right glass power window of your car is worn out so that when the power windows go up the side of the glass you can not be detained in a good position so the glass will look skewed.
How to replace windshield run right:

1. Position the power window glass in the down position.
2. Pull out the power window glass run towards the front right side up either from the left or right side.
3. Lubricate the rails run the glass by using a lubricant that aims at high tide later on easier.
4. Replace the glass run a new one by entering one side side, so you can easily run into the glass its tracks, increase power window just a little, as he held down the power window glass to the bottom where the run will go into the rails, doing it that way until all the glass run can clicks into place correctly.

GOOD TRY

avanza, online avanza, toyota avanza, toyota avanza, toyota avanza for sale, toyota avanza sale, new toyota avanza, avanza 2011, new avanza, avanza former